Managing attached vehicles in a cab fleet: the Four-Gate Vendor Cycle
How to manage attached vehicles in a cab or chauffeur fleet: vet vendors, agree rates, allot duties fairly and settle vendor bills without disputes.
Very few cab, chauffeur or employee transport operators run every duty on their own cars. On a busy morning, in a festival week or for a new corporate contract, the extra work goes to attached vehicles: cars owned by a vendor, a small fleet owner or a driver who owns his own car, and run under your name. They let you take work you could not otherwise cover, and they bring familiar problems: a car arrives with a lapsed permit, the vendor's rate is different from what the office remembered, two people disagree about the kilometres, and the vendor's bill arrives weeks later with duties nobody can match. This guide explains how to manage attached vehicles so they behave like part of your fleet, using a method we call the Four-Gate Vendor Cycle.
Your client does not care whose car turned up: if an attached car is late or its driver has no valid licence, the complaint is yours, even though you control that car far less than your own. That is why attached vehicles go wrong in predictable places: at onboarding, when nobody checks the papers; at pricing, when the rate lives in a phone call; at allotment, when the office sends work to whichever vendor answers first; and at settlement, when the vendor's figures and yours do not agree. Each of those is a gate. If a vendor car passes all four with a record, most of the trouble goes away.
The Four-Gate Vendor Cycle
Every vendor, and every attached car, should pass the same four gates in order. Write down who in your office owns each gate.
- Gate 1, Vet: the vendor, each car and each driver are checked and their documents recorded before any work is given.
- Gate 2, Rate: the rate for each duty type and vehicle type is agreed in writing, with a start date, before the first duty.
- Gate 3, Allot: duties go to vendors by a rule the whole office follows, not by habit, and only to vendors cleared for that city, duty type and date.
- Gate 4, Settle: the vendor's figures for each duty are matched to yours, the bill is built from completed duties, and advances, fuel and penalties are taken off before payment.
Gate 1: vetting the vendor, the car and the driver
Onboarding is where most attached-vehicle risk is created, because a car that slips through on day one keeps running for months. Keep three separate records: the vendor as a business, each vehicle, and each driver.
- The vendor: legal name, contact person, address, tax registration (GSTIN in India, VAT number in the UAE or Saudi Arabia), bank details for payment, and the payment terms you agreed.
- Each vehicle: registration, insurance, permit and fitness or inspection papers, with an expiry date for each. In India a commercial permit and the fitness certificate matter as much as insurance; in the Gulf the vehicle's registration and the operator's licensing rules do.
- Each driver: licence with its expiry, a badge or professional licence where your city or client requires one, a mobile number of his own, and any background check your corporate clients ask for.
- A short induction: your dress code, how to mark arrival, who to call when the passenger cannot be reached, and how the duty slip is filled in.
Record the expiry dates, not just a tick that the papers were seen. A document that was valid at onboarding will lapse while the car is still running for you. Our guide to fleet document compliance tracking explains how to keep those dates in front of the office.
Gate 2: agreeing rates that survive a dispute
Most vendor disputes are rate disputes in disguise. The vendor remembers a figure from a phone call, the office remembers another, and the bill becomes a negotiation. Put the rate card in writing for every vendor, and make it as detailed as the rate card you give your clients.
- Rates per duty type: local packages, airport transfers, outstation duties and monthly hire each need their own line.
- Rates per vehicle type: a sedan, an SUV and a tempo traveller are priced differently, and a vendor may supply only some of them.
- Extras: extra kilometres, extra hours, night charges, driver allowance on outstation duties, and who pays tolls and parking.
- Validity: a start date and, if you can agree one, an end date, so an old rate cannot be claimed after a revision.
- Deductions: what you can take off a bill, such as fuel you supplied, an advance you paid, or a penalty for a late or missed duty, and how much.
Compare the vendor rate with the rate you charge the client for the same duty. If the margin on a duty type is thin or negative, you are better off knowing before you allot the work than after the invoice. The cab fare calculator helps you price a duty from your own rates.
Gate 3: allotting duties to vendors fairly
Allotment is where operators lose money quietly. When the office sends work to whichever vendor picks up the phone, your own cars sit idle while vendors are paid, a cheaper vendor gets passed over, and one vendor ends up with all the good duties. A written allotment rule fixes most of this.
- Own vehicles first: offer a duty to your own free cars and drivers before any vendor, so your fixed costs are covered.
- Then an order of vendors: by contract, by rate for that duty type, or by performance, but the same order every time.
- Only cleared vendors: a vendor whose papers have lapsed, or who is not set up for that city or duty type, is not offered the duty at all.
- Client preferences: some corporate clients name the suppliers they accept. Respect that list on their duties.
- A clear acceptance: the vendor confirms the duty and names the car and driver before the pickup, so the passenger and the client are told who is coming.
Once the vendor has accepted, the duty should look like any other on your board: tracked, with the driver marking arrival, and with a duty slip at the end. Our article on how auto-allocation of drivers and vehicles works shows how the same rules can be applied by software.
Gate 4: closing duties and settling vendor bills
Settlement goes wrong when the vendor bills from his own notes and you check against yours. Turn it round: build the vendor's bill from the duties that were completed and closed, with the figures agreed on each duty slip.
- Close each vendor duty on the day with its start and end times and opening and closing kilometres. A duty slip format that both sides sign removes most arguments.
- Work out the vendor's amount per duty from his rate card, and the client's amount from yours. They are two different figures for the same trip, and both should be kept.
- Build the vendor bill from a period's completed duties, so a duty cannot be billed twice or missed.
- Take off advances paid, fuel supplied and agreed penalties, and record the reason for each deduction.
- Handle tax properly. In India, payments to transport contractors usually attract TDS under the contractor provisions (section 194C of the 1961 Act, carried into section 393(1) of the Income-tax Act, 2025 from April 2026), and a vendor's GST invoice decides whether you can claim input credit. In the UAE and Saudi Arabia, keep the vendor's VAT number and invoice number for any VAT you reclaim. Confirm rates and rules with your accountant.
- Pay on the agreed terms, and send the vendor a statement showing what was billed, what was deducted and what was paid.
Review every vendor monthly. Count duties offered, accepted, declined and completed, complaints and penalties, and the margin you made on that vendor's work. The vendors worth growing with are usually obvious after three months of these figures.
How MobilityDrive handles attached vehicles and vendors
MobilityDrive treats vendors as part of dispatch and accounts rather than a separate spreadsheet. Here is what it does, and where it stops.
- Supplier records: each vendor, subcontractor or driver who owns his car (DCO) is kept with its tax registration, bank accounts, payment terms, documents, rate cards and contracts. Suppliers can also be added in bulk from a CSV file.
- A supplier portal: a vendor can sign in to accept or decline duties, name its driver and vehicle for a duty, close the duty with times and odometer readings, keep its own vehicles and drivers up to date, submit bills and see what has been paid and deducted. Its legal name, tax registrations and rates stay under your control.
- Vendor drivers in the driver app: a vendor's driver can be given a login and sees only the duties given to him.
- Allotment rules: you can try your own vehicles first and fall back to vendors when none is free, follow a vendor order or contracts, and put a client's preferred suppliers first. A vendor not set up for the duty's city, duty type or vehicle type, or tied to another branch, is not offered the duty, and expired vendor compliance can be treated as a block. See booking and dispatch software.
- Supplier bills from duties: a bill is built from a supplier's completed duties, with fuel and other deductions taken off. Advances are approved as payments and set against the bill for that duty. For India, TDS on vendor payments and the GST split on supplier bills are handled; for Saudi Arabia, the supplier's VAT number and invoice number are kept for VAT reclaim. See fleet billing software.
- Approvals and ageing: approval limits by role for purchase orders, bills and settlements, a supplier ageing report, and supplier credit and debit notes. Approved bills and payments post to the accounts and can be exported to Tally.
- Margin per duty: the profit report sets the supplier's cost against the client's charge on each duty, and can be rolled up per supplier. Vendor spend and profitability by vendor are among the reports that can be scheduled. See fleet analytics and reporting.
- Disputes and scorecards: disputes with a vendor can be recorded and resolved, a deduction raised from a resolved dispute is netted at settlement, and each vendor has a scorecard built from its assignments.
The limits are worth knowing. The vendor scorecard reports on-time performance only where performance periods have been recorded, because it does not yet work punctuality out from trip times on its own. MobilityDrive does not check a vendor's documents with any government database: it keeps the expiry dates your team enters and acts on them. It does not file TDS or VAT returns for you; it prepares the workings your accountant files. And it does not find new vendors for you: the supplier network is the one you build.
Attached vehicles: common questions
- What is an attached vehicle? A car owned by someone else, usually a vendor, a small fleet owner or a driver who owns his car, that runs duties under your company's name for an agreed rate. You carry the client relationship; the owner carries the car.
- Should I pay vendors per duty or a fixed monthly amount? Per duty suits occasional overflow work. A fixed monthly amount with a kilometre and hour limit suits a car dedicated to one corporate contract. Whichever you choose, write the extras and deductions into the rate card.
- Who is responsible if an attached car's documents have lapsed? In practice, you are, because your client booked you. Keep the expiry dates on file and stop offering duties to a vendor car the day a document lapses.
- How do I stop vendors getting work my own cars could do? Make own vehicles first the written rule, and check each week how many vendor duties ran while one of your own cars was free on the same day.
- How do I avoid disputes over vendor bills? Agree the rate card in writing, close every duty with times and kilometres on the day, build the bill from those closed duties, and give the reason for every deduction.
Put your vendors through the four gates this month
Take your three busiest vendors. For each, list the cars and drivers they send you with every document expiry date, write out their rate card for each duty type you use, and note how you decide which of them gets a duty. Then match last month's vendor bill against your own duty slips, line by line. Every gap you find shows which gate needs tightening first.
If you would like to see vendor duties, the supplier portal and supplier bills working together, read about taxi and cab fleet software in India or chauffeur and limousine software, then book a demo with our team. Bring one vendor's rate card and we will set it up, allot a duty to that vendor and build its bill in front of you.
See how MobilityDrive handles this in practice
Bookings, dispatch, tracking, duty slips and invoices in one system. Book a demo on your own data.