Vehicle maintenance scheduling for cab and chauffeur fleets: the Three-Trigger Plan
How to schedule vehicle maintenance in a cab or chauffeur fleet: set kilometre, date and condition triggers, book services around duties, keep records.
In a cab or chauffeur fleet, a car in the workshop is a car that cannot be sold, and a car that breaks down on a duty costs far more than the repair. The passenger is stranded, a replacement has to be found at short notice, the client remembers it at renewal time, and the next duty on that car falls through as well. Most operators know a car needs servicing. What goes wrong is the scheduling: services fall due in the middle of the busiest week, nobody notices the tyres until a driver complains, and the service history lives in a workshop's paper file. This guide explains how to schedule vehicle maintenance so it happens before a failure and around your duties, using a simple method we call the Three-Trigger Plan.
Why maintenance scheduling is a dispatch problem, not only a workshop problem
The workshop decides what a car needs. The operator decides when the car can be spared. That second decision is where most fleets lose money, because a service booked without looking at the duty board takes a car off the road on a day it was already promised to a client. The dispatcher then covers the gap with an attached car at a vendor's rate, or moves a driver onto a car they do not know, or lets the service slip by another week.
Treat a service as a duty with no passenger. It has a date, a vehicle, an expected length and a cost. Once it sits on the same calendar as your bookings, the dispatcher can see it coming, plan around it and stop selling the car for that day. A service that lives only in a mechanic's diary will keep colliding with your bookings.
The Three-Trigger Plan
Every maintenance item in your fleet should be due on one of three triggers, whichever comes first. Writing all three down for each item is what turns maintenance from a reaction into a schedule.
- Kilometre trigger: the distance after which the item is due, from the manufacturer's service schedule. Oil and filter changes, brake pads, wheel alignment and timing belts are usually set by distance.
- Date trigger: the time after which the item is due even if the car has not run far. Cars that sit for long periods still need fluids and batteries checked, and a fixed date catches the spare car that nobody drives.
- Condition trigger: what a driver or supervisor sees or hears that brings the item forward. A warning light, a pull to one side, a soft brake pedal, tyre wear or an AC that no longer cools on an airport run in summer.
The kilometre and date triggers come from the vehicle's manual and your workshop. The condition trigger comes from your drivers, which is why it needs a routine rather than goodwill. Each item gets the first two written as numbers, and the third written as a short list of things the driver checks.
Setting the kilometre trigger from real readings
A kilometre trigger is only as good as the odometer readings behind it. Cab and chauffeur operators already record opening and closing kilometres on every duty slip, so the readings exist. The task is to turn them into a running figure per car and compare it with the next service point.
- Record the odometer reading at every service, along with what was done, so the next service point is a number, not a guess.
- Take the closing reading from the last duty slip of each day as the car's current kilometres. Garage runs count too, so make sure drivers record the reading when the car goes back.
- Work out the average kilometres per week for each car. A car on outstation duties will reach its service point much sooner than one parked at a client's office for a monthly booking.
- From those two figures, estimate the week the car will reach its next service point and book the service a few days before it.
The same readings show which cars are running empty. If the kilometres on a car rise faster than the billed kilometres on its duty slips, the gap is dead mileage, and it is wearing the car without paying for it. Our guide to reducing dead mileage with the Four-Readings Test shows how to measure it.
Booking services around duties
Once you know roughly when each car falls due, the next job is choosing the day. A few habits keep services out of the way of paying work.
- Look at the duty board before you call the workshop. Pick the quietest day in the week the car falls due, not the first slot the workshop offers.
- Avoid the days you know are heavy: month-end corporate travel, festival and wedding seasons, and the mornings of large airport runs.
- Book the service on the calendar as soon as it is agreed, so nobody allots the car to a duty that day. A car with a service on Thursday should not be offered for a Thursday outstation trip.
- Spread services across the fleet. If several cars were bought together they will fall due together, so bring some forward rather than losing three cars in one week.
- Plan the driver as well. A driver whose own car is in the workshop can cover a spare car, take leave or do a garage-side job, but someone has to decide which before the day.
For long services and body work, ask the workshop for a return time in writing and add a buffer. A car promised back at five in the evening should not be on a six o'clock airport pickup.
Making the condition trigger work: the driver's daily check
Drivers notice problems first, but they report them late, or only by phone, or only when something has already failed. A short daily check gives them a routine and gives you a record. Keep it to items a driver can see in two or three minutes before taking the car out.
- Tyres: visible damage, low pressure and uneven wear.
- Lights and indicators, including brake lights.
- Warning lights on the dashboard after starting.
- Fluids the driver can check without tools, such as coolant and washer fluid.
- Wipers, horn, AC and seat belts.
- Cleanliness inside and out, which chauffeur clients notice before anything else.
Ask for a photo when something is wrong, and route every failed item to one person in the office who decides whether the car can go out. If the answer is no, the car comes off the board for the day and the duties move. The check only works if a failed item has a consequence and a passed one costs the driver little time.
Tyres, fuel and the cost per kilometre
Tyres are the item most often left to chance. Record each tyre by its serial number, which position it sits in, the date it was fitted and the kilometres it has run. That tells you when a set is near the end of its life, which brand lasts longest on your roads, and whether rotating tyres between positions is being done. Fuel deserves the same care. A car whose fuel use per kilometre rises without a change in its work is often telling you something about its engine, its tyres or its driver.
Put the costs together per car: services, repairs, tyres and fuel against the kilometres it ran and the revenue it earned. The cars that cost most to keep on the road are not always the oldest, and the figure helps you decide when to replace a car rather than repair it again. Keep the workshop's invoice for every job, with the supplier's tax number where you can claim GST input credit in India or VAT in the UAE and Saudi Arabia.
Keeping the paperwork in step with the workshop
Maintenance and compliance are separate jobs that often share a day. A fitness certificate in India, or a periodic vehicle inspection in the Gulf, usually needs the car in good condition before it is tested, so book the service a little ahead of the inspection date. Insurance renewals, permits and pollution certificates are not services, but they take the car off the road just as surely when they lapse. Our article on fleet document compliance tracking covers the documents side.
How MobilityDrive handles vehicle maintenance
MobilityDrive keeps maintenance in the same place as your vehicles and duties, so a service shows up where the dispatcher is already looking. Here is what it does, and where it stops.
- Service records per vehicle: each record holds the type of work, a description, the date, who did it, the cost, a status (scheduled, under maintenance, completed or cancelled), the next service date and a copy of the workshop's invoice. For VAT-registered companies it also keeps the supplier's VAT number and invoice number. See fleet management software.
- A notice before the next service: your admins are notified in the eight days before a vehicle's next service date.
- The car comes off the road on the day: if you have set up an Under Maintenance vehicle status, a vehicle is moved to it on its service date and its assigned driver is released from it.
- Services on the calendar: the availability calendar shows the days a vehicle is booked for maintenance next to its duties and its driver's leave, and when a car is picked for a duty by vehicle type, a car with a service in the duty's dates is left out. See how auto-allocation of drivers and vehicles works.
- The driver's check: when a driver goes on duty, the driver app can take them through the vehicle inspection questions your office sets, with photos.
- A tyre register: each tyre by serial number, position, kilometres run and cost per kilometre, flagged once it has used nine tenths of its expected life.
- Costs per car: service costs stay on the vehicle's history and fuel entries are recorded per vehicle, so you can see what each car costs to keep on the road. Wider reports are in fleet analytics and reporting.
The limits are worth stating plainly. Service reminders run on the dates you enter, not on odometer readings, so the kilometre trigger is still worked out by your team from duty slip readings and turned into a date. MobilityDrive does not read fault codes from the vehicle, does not predict failures, and does not keep a parts store or workshop job cards. It is a scheduling and record system for the operator, not workshop software.
Vehicle maintenance scheduling: common questions
- How often should a cab be serviced? As often as its manufacturer's schedule says for its kilometres or its age, whichever comes first. Cabs run far more than private cars, so most reach the kilometre point long before the date. Use your own duty slip readings to see how soon.
- Should I service by kilometres or by date? Both. The kilometre trigger suits cars in daily use; the date trigger catches the spare car and the car parked at a client's office. Whichever comes first sets the service.
- Who should decide whether a car with a fault goes out? One person in the office, not the driver alone. The driver reports with a photo, and the office decides, so the call is consistent and recorded.
- Do attached or vendor cars need the same schedule? Their owners maintain them, but you carry the risk on your duties. Ask vendors for service dates and check their cars with the same daily routine before they carry your clients.
- When should I replace a car instead of repairing it? When its running cost per kilometre keeps rising and its downtime starts to cost you duties. Keeping the costs per car is what makes that decision visible.
Start your maintenance plan this week
Take five cars from your fleet. For each, write down the last service date and odometer reading, the next service point in kilometres and as a date, and the current reading from yesterday's duty slip. Estimate the week each car falls due, find the quietest day in that week on your duty board, and book it. Then write a six-item daily check and give it to those five drivers. In a month you will know whether the plan fits your work, and you can roll it out to the rest of the fleet.
If you would like to see service dates, the availability calendar and the driver's inspection working together, read about taxi and cab fleet software in India or chauffeur and limousine software, then book a demo with our team. Bring one car's service history and we will set it up and show where its next service lands on the dispatch board.
See how MobilityDrive handles this in practice
Bookings, dispatch, tracking, duty slips and invoices in one system. Book a demo on your own data.